(1) Ceramic and composite filter material technology
Diatomaceous earth is the world’s most effective solid-liquid separation medium, diatomaceous earth covered with 0.0003mm(0.3 micron) or so micropores, the product uses this physical structure of diatomaceous earth, the use of the highest level of diatomaceous earth, the 0.01mm particle size of ultra-fine diatomaceous earth through extrusion, high temperature sintering to form about 10mm thick diatomaceous ceramics. 10mm thick ceramic is equivalent to 1000 layers of ultrafine diatomite composed of a filter aperture of 0.3 micron filter, tap water after the 1000 layers of physical filtration, the tap water more than 99% of the volume of more than 0.3 micron harmful substances and bacteria isolated in the ceramic outer layer, and allow the volume of less than 0.3 micron minerals and trace elements through to, So as to achieve the purpose of water purification. The ceramic filter made of diatomaceous earth can be repeatedly cleaned and used without secondary pollution and large water yield. The filter element should be replaced regularly.
Composite filter material can remove residual chlorine in water, increase the content of minerals in water, make the water quality more conducive to human health, and has been widely used in the field of water purification.
(2) Ceramics and nano-KDF technology
The water purification technology based on the membrane built-in ceramic filter element and nano-KDF filter material (NMC), the water flow rate is greater than the water purifier using hollow fiber technology, the ceramic filter element can be repeatedly cleaned and used, and the filter element needs to be replaced regularly after a certain service life. Among them, nano-KDF filter material (NMC) does not have the phenomenon of bacterial growth during the use of activated carbon and the phenomenon of easy hardening and increased resistance during the long-term use of KDF, and has been widely used in the field of water purification.
(3) Powder coconut shell activated carbon,
Supplemented by a special high adsorption composite material, the use of foreign advanced high temperature sintering process fired, sintering molding inside the filter element formed a firm molecular sieve cage structure, the pore size is fine, zigzag, greatly extending the contact time between water and activated carbon, water impurities once adsorbed will not be deadsorbed. This process replaces the existing spiral extrusion molding process to produce compressed carbon, and avoids the adhesion of activated carbon surface due to binder coating.
The filter integrates adsorption and interception functions. The iodine adsorption value of the selected activated carbon powder is ≥1200mg/g. The high-quality imported carbon powder, due to its large specific surface area and extremely rich nanoscale microporous structure, has a superior adsorption capacity compared with the commonly used granular carbon and compressed carbon filter element produced by granular carbon on the market, especially the instant adsorption capacity is very strong. After authoritative testing, for the adsorption of residual chlorine, organic matter, pesticides, heavy metals, flavor and color removal effect is particularly significant, truly complete purification of water quality, improve taste.
(4) Hollow fiber technology
The water purification technology based on hollow fiber membrane can filter out most of the pollutants in the water, and the filter element needs to be replaced regularly.
(5) Activated carbon technology
Activated carbon is the main water purification material for the faucet water purifier, but the simple activated carbon technology is easy to breed bacteria, so the general brand of water purifiers are strictly stipulated the service life of the water purifier, once the life is reached, it is necessary to abandon or replace the new filter element in time.
Post time: Dec-18-2024
